RoHS /SGS Aluminum Foil For Battery 2S / CM Conductivity None Pinholes

Modified AL aluminum Foils

current collector conductive Modified carbon-coated aluminium Foil for Lithium-ion batteries Super

capacitor.

Application:

A. (LFP.LMO.NCM.NCA.LNM.LTO):for electric vehicles and energy storage(LFP.LMO.NCM.NCA.LNM.LTO)

B. (LCO.NCM):Lithium-ion batteries for 3C productions(LCO.NCM)

C. supercapacitor

D. Lithium-ion supercapacitor

Advantages

1. Improve the surface tension, and increase the adhesion between the aluminium foil and the active material.

2. Decrease the using amount of binder for the electrode ,enhance energy density of the battery ,and lower the cost of the electrode production

3. Protect the AI current collector from surface corrosion and oxidation.

4. Reduce interface resistance and internal resistance of the cell.

5. Decrease polarization and improve the rate capability and specific capacity of the electrode material

6. Mitigate exothermic reactions and enhance the battery safety

7. Improve the production stability and reproducibility ,and raise the pass rate of the cell

8. Increase the consistency and cycling life of the cell,and lower the cost of the production.

important cautions:

1.1 Use the product under the temperature of 20-25℃ and humidity of ≤20%RH

1.2 The coating layer is highly Hydrophilic, handle it under personal protection.

1.3 Avoid using the product under dust, The dust purification should be over 0.1M.

1.4 Avoid any collisions against hard materials. Handle the product gently.

1.5 This product is developed by our company for the application in batteries , if application in other fields, please discuss with us for it .

Packaging marketing:

The product type,quantity ,production date and place etc, are indicated on the package.

usage and storage:

2.1 Use the product in the workshop with humidity of ≤20%RH and a high dust purification.

2.2 Store the product below 35℃, do not open the vacuum package before use .after use ,the left product should be dried at 40-60℃ for 2 hours under vacuum ,then kept in the cabinet filled with nitrogen at room temperature.

2.3 The product can be stored under vacuum package for one year at ambient temperature and moisture without direct sun. Once the vacuum package is opened, the product can be kept under vacuum cabinet for at most one month.

Jima Copper is a professional supplier of high-precision copper and copper alloy series of foil roll brand. Jima provided 4-800μm thick copper foil, Maximum width 1580 mm, Jima copper foil production capacity is sufficient, with complete varieties, excellent quality.

Jima specializes in the research, development, promotion and application of new technology of rolling copper foil, and it is equipped with a research center of rolling copper foil engineering technology. Jima copper can stably provide various specifications of high-precision flat foil (hard foil, soft foil, semi-hard foil, etc.) and surface treatment foil (red dumb copper foil, black dumb copper foil, high corrosion resistance rolled copper foil, etc.). The products are widely used in electromagnetic shielding, heat dissipation, graphene conductive film production, aerospace, flexible copper plate, lithium battery, 5G communications, LED, intelligent vehicles, drones, wearable electronics and other fields, which is highly recognized and praised by customers. And it is exported to Korea, Japan, Germany, the United States, Russia, India and other countries.