China Categories
All Categories
Si3N4 Full Ceramic Bearings , Cage Was Made By PTFE , GFRPA66-25 , PEEK , PI , Phonemic Textiles Tube , etc .
Ask Latest Price
Brand Name:TOB Ceramic Bearings
Certification:ISO 16949
Price:negotiated
Payment Terms:T/T
Supply Ability:negotiated
Delivery Time:negotiated
Company Data
Verified Supplier
Contact Person
Leo Wu
Business Type:
Manufacturer Distributor/Wholesaler Exporter Trading Company Seller
Officials:
Room 1008, TongLe Business Mansion, JiaXing 314033, ZheJiang, China
Quality:
Quality Certifitation Available
Visit Website
Product Details
Company Profile
Product Details
Si3N4 Ceramic Bearings, Full Ceramic Bearings
Full ceramic bearing made with Si3N4 have some better performance than ZrO2, the rings and balls made by full ceramic material:Si3N4, as a standard contracture, the cage made by PTFE, generally we also could make the cage with GFRPA66-25,PEEK,PI, Phonemic Textiles Tube ,etc. Compares than the material of ZrO2, The SiN4 ceramics bearings could endure heavier load and could be used in higher temperature environment. Also we could offer precision ceramic bearing which generally used in high-speed and high-rigidity spindle. The manufactured clearance could be P4 to UP grade.
| Comparison of bearing material technical data | ||||||
| Technical data | unit | GCr15 | 9Cr18 | Si3N4 | AL203 | ZrO2 |
| Density | g/cm³ | 7.8 | 7.9 | 3.2 | 3.95 | 6 |
| a Coefficient of expansion | 10^-6/℃ | 11 | 17 | 3.2 | 9.1 | 10.5 |
| E modulus of elasticity | Gpa | 208 | 200 | 320 | 380 | 210 |
| μ Poisson ratio | 0.3 | 0.3 | 0.26 | 0.27 | 0.3 | |
| HV Hardness | 800 | 700 | 1700 | 1800 | 1300 | |
| δ Flexural strength | Mpa | 2400 | 2600 | 900 | 220 | 1000 |
| δ Compressive Strength | MPa | 2000 | 1500 | 3500 | ||
| Kc Impact strength | Nm/cm² | 20 | 25 | 7 | 3.5 | 11 |
| λ Thermal conductivity | W/mk | 30-40 | 15 | 3.5 | 25 | 2.5 |
| Ω Specific resistivity | mm²/m | 1 | 0.75 | 10^18 | 10^8 | 10^5 |
| Specific heat | J/KgK | 450 | 450 | 800 | 880 | 400 |
| Application temperature | ℃ | 120 | 150 | 1000 | 1850 | 800 |
| Anti-corrossion | No | poor | Good | Good | Good | |
| Cycle stress | 10*10^6 | 10*10^6 | 50*10^6 | 30*10^6 | 50*10^6 | |
| Destroy model | peel | peel | peel | fracture | peel/fracture | |
| Anti-magnetism | Yes | Yes | No | No | No | |
| Dimension stability | bad | poor | Good | Good | Good | |
| Insulate properties | No insulation | No insulation | Good | Good | Good | |
| Basic properties of staple engineer plastic | ||||||||
| Material | HDPE | PP | POM | PA66 | PVDF | PPS | PTFE | PEEK |
| Long-time working temp. | 90 | 100 | 110 | 100 | 150 | 230 | 260 | 280 |
| Density | g/cm3 | 0.91 | 1.42 | 1.14 | 1.77 | 1.35 | 2.18 | 1.32 |
| Ball indentation hardness | 50 | 80 | 170 | 170 | 80 | 190 | 30 | |
| Tensile stress | 25 | 30 | 70 | 80 | 50 | 75 | 25 | 95 |
| Sliding friction coefficient | 0.29 | 0.3 | 0.34 | 0.35-0.42 | 0.3 | 0.08-0.1 | 0.3-0.38 | |
| Melted temperature | 130 | 165 | 175 | 260 | 172 | 280 | 327 | 343 |
| Short-time highest application temperature | 90 | 140 | 150 | 170 | 150 | 260 | 260 | 300 |
| Coet of Inear expansion (10^-5/K) | 13-15 | 17 | 10 | 8 | 13 | 5 | 12 | 5 |
| Dielectric constant at 1 Mhz(10^6HZ) | 2.4 | 2.25 | 3.7 | 3.6-5 | 8 | 2.1 | 3.2-3.3 | |
| Volume resisrivity (Ω·cm) | >10^15 | >10^24 | >10^14 | 10^13 | 10^12 | >10^13 | 10^14 | 10^13 |
| flammability UL94 | + | + | - | (+) | (+) | - | + | + |
| Anti-weathering | - | - | - | - | - | - | + | - |
| Note: + =resistant; (+) =partly resistant; - =non-resistant | ||||||||
Company Profile
ZHEJIANG TOP BEARINGS CO., LTD.
ZHEJIANG TOP BEARINGS CO., LTD. is a manufacturer and distribution of sliding bearings. Our products have been widely applied to more than 30 industries like automobile, engineering machinery, metallurgy, water conservancy and hydroelectric power and mechanical manufacturing. Also we can design for customer's specific requirement.
We have reformed boldly, absorbed social elites through strengthening talent training, fully implemented modern management mechanism and new marketing strategy and been dedicated to long-term development of self-lubricating bearing industry. To control quality strictly, we set up a complete quality management system (ISO9001 and ISO/TS16949) in the quality policy of “Top Quality, Top Credit, Sustainable Growth”. Our quality and performance have reached advanced level.
To expand more markets, stand on the word and meet diversified requirements of customers, we are actively expanding and integrating with international markets. Now our products are available in more than 20 countries and regions in Western Europe, America and Southeast Asia. We’ll strengthen industrial horizontal integration further, create scale effect, open up emerging fields and develop industrial advantages to realize our strategic target and create a bright future with friends.
Send your message to this supplier
You May Like
Oil Apertures Wrapped Bronze Plain Bush Bearing For Engineering Machines
Stainless Steel JDB Plain Bush Bearing With Flange / Sockets
Liquid Or Solid Lubricant Sintered Bronze Bearings / Plain Bearing Bush
Mechanical Articulating Joint Rod End Plain Bush Bearing GE GEC GEG GEEW GEK GEH
Flanged FB090 Plain Bush Bearing CuSn8P With Diamond Or Ball Shape Oil Sockets
Plain Bush Bearing Particular Made GCr15 Steel Solid Lubricant Is Filled
Aluminum Body Surface Cast Bronze Bearings / Copper Bearing
POM Sliding Bearings SF-2 Series ( SF-2 , SF-2Y ) , DX Self Lubricating Bushing
SF-1 Plain Bush Bearing Bushing , PTFE Self Lubrication Multilayer Composite Bearings
Casting Bronze Bearings , Strengthening Brass With Solid Lubricant Casting Bronze Bearings
Tin Lead Bronze Alloy CuSn4Pb24 Bi Metal Bearings Carbon Steel HB 45-70
Inquiry Cart
0