
Audio Conference Microphone Conference Discussion Microphone System with Built-in Loudspeaker
Features
Stylish, low profile design with touchable interface
Standard CAT5e and RJ45 connectors are used in CLEACON series to
provide more convenient on project and maintenance.
The connection of MIC units are either hiding underneath or from
the rear of the unit, makes it convenient for different request of
installation,
Five keys voting function
Support interpretation function with 64 channels selector which
can display the language and channel number(Insert the earphone and
the channel selector is active)
OLED screen, providing excellent brightness, contrast, wide
viewing angle but low power consumption
Internal high fidelity loudspeaker
Head-set interface in both sides with volume adjust
Line-in interface which allows microphone or other line-in device
like cell phone, laptop to pass audio through to perform
teleconference
The unique AUDIO-LINK digital ring network technology achieve
full-digital signal transmission and processing, completely avoid
the RF interference from cell phone or similar devices.
Strong system robust by the "Hand-in-Hand-Loop-Network"
connection method.
Timer on display to set certain time for each delegate to speak,
will remind user or close the MIC automatically
All units can be configured as Chairman
or Delegate unit through software settings based on model DVC-T.
Functions
Compliance with IEC 60914, GBT 15381-94
The unique AUDIO-LINK digital ring network technology achieve
full-digital signal transmission and processing, completely avoid
the RF interference from cell phone or similar devices.
One CAT5e cable to transmit 64 channel audio and other signals
High fidelity sound by zero loss audio transmit technology, 48K
audio sampling frequency, 20Hz~20KHz response frequency
"Hand-in-Hand-Loop-Network" connection makes the system always
working perfectly no matter changing discussion unit or having any
malfunctioned units
This system assigned to each unit independently ID to avoid
duplicate ID conflict
Support AGC(Automatic Gain Control)/AFC(Adaptive Feedback
Cancellation)/ANC(Active Noise Control )/Mix (Auto-Mix) technology
Build-in functions for intercom
Hot-swap for any system unit, and the controller has
auto-recovery function
Precise directional microphone head with anti-wind microphone
foam cover, with two-color LED indicator
Five keys voting function
Support interpretation function with 64 channels selector which
can display the language and channel number(Insert the earphone and
the channel selector is active)
Button for MIC ON/OFF, Priority & Apply Answer button for
chairman unit
Built-in high fidelity speakers, it automatically mutes to
prevent howling when press MIC ON
Head-set interface in both sides with volume adjust
Without using PC software, our conference controller still owns
following settings:
Limit on the number of speaking persons: By Setting the number of
active units at the same time(Number is 1/2/4/6/ units)
Discussion modes:
"OPEN" Free for all, limited by the active units setting by
controller, "OVERRIDE" First in First out,"FREE" Turn on the MIC
freely up the max. quantity, "APPLY" To apply then to speak
Voting function: Approve/Abstain/Object
Chairman unit has priority to close all other units or mute them
temporarily
Chairman unit can answer the application for speaking from
delegate
Support simultaneous language interpretation
Support more voting functions by the PC software
Work with our HD camera and video matrix switcher, it applies
camera auto tracking function
The unit showing real time on the screen, and count-down timer
for speaking person.
Control & Indicators
Each unit with two-color LED indicator on microphone, red for
speaking, green means need acceptance from chairman to speak
128x32 OLED display with volume bar, clock, time span of microphone
activating, interpretation channels and language, MIC ON/OFF etc
and other information.
5 voting keys with indicators, While no launching voting, no.2 and
no.3 button is also work as channel selecting buttons, no.4 and
no.5 work as volume buttons.
MIC ON/OFF buttons with indicators
Chairman unit with priority button and consent button for the
delegates
Interfaces
Pluggable microphone base
2x 3.5mm stereo headphone jack
1x 3.5mm stereo input jack
2x RJ45 connectors
Technical Parameters
Button: Touchable interface, no physical buttons
Sound Pickup: heart type capacitance
Display: OLED display 128 × 32
Sensitivity: -46 dBV / Pa
Maximum power consumption: 2.0W
Directivity: 0 ° / 180 °> 20 dB (1 kHz)
Headphone load: 16Ω
headphone volume: 10mW
Headphone jack: 3.5mm stereo
Input impedance: 2kΩ
SNR: 70dB
Frequency response: 20 ~ 20000Hz
Connection: CAT5 / CAT6 cable + snap
Equivalent noise: 20dBA (SPL)
Main material: ABS
The maximum sound pressure: 125dB (THD <3%)
Weight: 1.1kg (with microphone)
Dimension: 185W × 130 D× 50H mm (without microphone)
Operating temperature: 0 ℃ to + 55 ℃
Color: Black
Item Model for Order
VIS-DVC-T..................... Digital Voting Chairman unit with
Channel Selector, microphone and cable not include
VIS-DVD-T.............. Digital Voting Delegate unit with Channel
Selector, microphone and cable not include
VIS-M330..................330mm Microphone, with anti-wind foam
cover
VIS-M410..................410mm Microphone(black), with anti-wind
foam cover
VIS-M600..................600mm Microphone(black), with anti-wind
foam cover
VISSONIC ELECTRONICS LIMITED
VISSONIC Electronics, www.vissonic.com, is a PRO AV company located in Guangzhou, mainly developping high tech audio visual devices including: Digital DSP Conference system, 5G wifi wireless conference system, wireless translation system, matrix switchers for standalone and modular, and programmable controller.
Our mission is to develop and manufacture the most comprehensive and innovative audio visual products for our clients. We provide the best performance/price ratio products because it could give you satisfaction just from the time you use them, we believe the good design with cutting edge technology on products will provide value to all our partners and end users. Listen to your demands, we fulfill it
VISSONIC Electronics is located in Guangzhou Huangpu Development Zone. We are a professional manufacturer of audio and video products in Guangzhou, with its own brand VISSONIC, is a collection of R & D, production, sales of high-tech enterprises. Our main task is to develop and produce high-performance and innovative audio and video products for our customers.
In recent years, VISSONIC has been adhering to the core of customer demand, in the domestic and foreign market development, at the same time, for many countries to provide conference solutions, quality, dedicated services and high-quality products have won the trust and praise of many enterprises. Also gradually set up a good brand. We have also established after-sales service system, in the use of the product is any problem, after sale will be professional and timely solution to your problem. At the same time, three years long warranty, so that customers better use our products.
Net control distribution system
Signal management
Conference system, wireless discussion/translation system
Over 10 years experienced Sales/R&D people in Audio/visual
industry, know well about what is most needed products in this
field.
Deeply combine traditional audio/visual products with network
communication, AV/IT become the core technology into our creative
solutions
We are proud of turning your constructive ideas into reality by
our strong design/research/production ability, developing new
methods on cooperation is our goal.
By providing our clients the simple/flexible products to use
By providing our clients the prompt technical support
By providing our clients the gateway of latest technology in trend