Reunion Steel Frame Truss design Architecture Metal Building construction

Reunion Steel Frame Truss design Architecture Metal Building construction

• Supply scope: steel frame
• Quantity: 68 Tons
• Contract value: USD64,260
• Description: 50*20*3.5m (L*W*H)*2 suits, steel truss frame, Double roof
• Anti-corrosion system: Epoxy rich zinc primer + Epoxy mio barrior middle paint, DFT 100um.
• Project place: Reunion (France)

>> Advantage

1) Anti-seismic: most house use slope roofing which usually use truss system. The roofing system will be very strong after the truss was sealed with panels and gypsum board. This kind of structure system can against 8-degree earthquake, and has high strength of loading capability.

2) Good Performance for against wind: light weight, high strength, good integrity, easy to deform, all these advantages make light gauge steel building good performance for against wind. It can resist the cyclone at the speed of 70m/s, thus protecting the building and peoples life.

3) Durability: light gauge steel building uses cold-formed galvanized steel, thus avoiding rust in the course of construction and use, and makes the life span of the structure 100 years.

4) Heat Preservation Performance: Heat preservation: we use glass wool as insulation and effectively avoid the phenomenon of cold bridge of the wall body. The heat preservation effect of 10mm glass wool is equivalent to 1m-thick brick wall.

5) Fire Resistance: As the experiment data shows, light steel system can resist fire for four hours and can effectively slow down the fire spreading.

6) Sound-proof Performance: Sound-proof performance is an important item for evaluating the accommodation. Light steel system adopt hollow glass for windows, which can soundproof for 40 dB. The light steel wall system can soundproof for 60 dB.

7) Healthiness: dry construction, minimum waste to the environment, and 100% recyclable of the materials, all these advantages are conform to the consciousness of environmental protection. Whats more, the materials we use are all green materials, which are good for peoples health.

8) Comfort: light steel wall system adopts highly efficient energy-saving system with respiration function to adjust the humidity of the room; with ventilation function in the roof, ensuring the ventilation and hot scattering of the room, thus make the room more comfortable.

>> Our production line

>> Quality control system

Raw material quality control:

Thickness tolerance re-check

Yield point and tensile strength testing in-house
Third party inspection are welcome
Supply traceable mill certificate.

Structural steel fabrication quality control:
100% testing dimension tolerance <3mm
20% sample welding line ultrasonic testing, no fault, full penetration
20% magnetic powder testing, no bubble, no defect, Smooth and Full
Supply third-party inspection assistance.

Anto-corrosion system quality control:
Shot blasting to reach grade Sa. 2.5, surface metal luster, no rust, no oil dirt, no welding spatter, Roughness >75um
Apply primer paint within 4 hours after shot blasting, Holiday-free coatings, smooth, No dust, Dry Film Thickness (DFT) >75μm.

Pre-assembly testing the connection details:

For special shaped steel structures components, we apply pre-assembly test in workshop before package and delivery.

>> Steel Building VS Ordinary Buildings:

The cost of steel structure warehouses is usually lower than that of ordinary buildings. The prefabricated steel structure’s construction process is usually not as easy to delay the construction period of other buildings. All drilling, cutting, and welding are carried out in the factory, and then the parts are transported to the construction site for installation. Since only the parts are assembled on-site, there is almost no other cost increase.

Moreover, the technical requirements for the assembly of this prefabricated steel warehouse are not high. Almost anyone can do it, thus reducing labor costs and saving time.

The steel warehouse building was assembled quickly. The construction of ordinary buildings will take at least a few months. To build a warehouse of the same size, the steel structure warehouse’s construction period is only 1/3 of that of other constructions. In addition to the short construction time, such steel structure buildings are generally cheaper than ordinary buildings.

Qingdao KaFa Fabrication Co., Ltd. is a professional steel structure company who could provide you one-stop solution of the steel structure projects . We specialize in Design, Manufacture,Delivery and Installation of the steel structure building. The floor space is 23,000㎡, and the workshop area is 12,000㎡. We own the light/heavy H steel production line, BOX production line, C/Z purlin production line and various types of profiling steel sheet machines. Our products have been exported to Australia, South America, Southeast Asia, Middle East and Africa. We are proud of helping our customers to build their dream to reality.