
Transformer oil filtration machine to increase and maintain the oil's dielectric strength, Vacuum Dehydration Machine
I. Application of Transformer Oil Filtration Machine
Transformers require filtered and dried oil. The efficiency of the oil as an insulating material is highly reduced as the moisture level increases. Hence, transformer oil filtering is an important process.
Transformer oil filtration is carried out with Ultra High Vacuum oil filter machine of adequate capacity. Our mobile oil filtration plant is designed to remove dissolved moisture, dirt, air and other gases from the transformer oil.
This Double two-stage Vacuum Mobile filtration plant operates on the principle of Low Temperature and High Vacuum. Especially suits for above 350KV power transformers. With a higher extreme vacuum to achieve a better dehydration and degassification.
II. Working Process of Transformer Oil Filtration Machine
1. Unfiltered oil is taken in to the system through the inlet valve.
2. Then the oil is sucked to the system by means of pressure difference.
3. Preliminary Coarse filters can remove solid and magnetic particles up to 50 μm size.
4. The oil is heated up to 60-65°C. After heating the oil flows into a specially designed vacuum chamber, where the moisture, air and other gases are extracted from the oil. The vacuum chamber is designed in such a way that the oil is spread out and is allowed to fall by gravity over the media inside, forming a thin film of oil providing a large surface area exposed to vacuum. With this exposure, the dissolved moisture and gases are evacuated to improve the insulating properties of transformer oil.
5. Then the oil is pumped by an outlet pump and passes through the fine filters where the particles up to 1 microns are filtered.
III. Oil Data Before & After Oil Filtration
PARAMETERS | UNITS | BEFORE OIL FILTRATION | AFTER OIL FILTRATION |
Break Down Voltage with 2.5mm Electrode | kV | 25 | ≥75 |
Moisture Removal | ppm | 50-100 | Up to < 3-5 |
Particle size (Filter Fineness) | Micron | Visible | < 1 |
Gas Content | % Vol./Vol. | <10% | < 0.1% |
IV.Machine Specification of Transformer Oil Filtration Machine
Item | Unit | VFD-30 | VFD-50 | VFD-80 | VFD-100 | VFD-150 | VFD-200 | VFD-300 | |
Flow Rate | L/H | 1800 | 3000 | 4800 | 6000 | 9000 | 12000 | 18000 | |
Vacuum Range | Mpa | -0.092 ~ -0.099 | |||||||
Working Pressure | Mpa | ≤0.2 | |||||||
Max Vacuum Range | Pa | ≤50 | |||||||
Temperature Range | ℃ | 20 ~ 80 | |||||||
Power Supply | 380V/3P/50Hz(or as needed) | ||||||||
Working Noise | dB(A) | ≤72 | ≤78 | ||||||
Heating Power | Kw | 24 | 30 | 48 | 60 | 90 | 120 | 150 | |
Total Power | Kw | 29 | 36 | 56 | 69 | 100 | 132 | 170 | |
Pipeline Diameter | mm | DN25 | DN32 | DN32 | DN40 | DN40 | DN50 | DN65 | |
Net Weight | Kg | 600 | 800 | 900 | 1150 | 1500 | 1700 | 2400 | |
Size | length | mm | 1350 | 1500 | 1550 | 1900 | 2200 | 2400 | 2900 |
width | mm | 1100 | 1200 | 1250 | 1400 | 1500 | 1600 | 1800 | |
high | mm | 1700 | 1750 | 1800 | 1800 | 1850 | 1900 | 2000 |
V. Available Style of Transformer Oil Filtration Machine
1. Fixing type,mobile type with four wheels and mobile type with
trailer.
2. Normal appearance type,shelf-covering type and explosion-proof
type.
3. Avaliable in different color.
About us:
►We are the leading manufacture near 25 years experience and supply
best quality and highest cost performance oil purification
machines/tratamiento del aceite dieléctrico. Our oil purifier
equipment are built by high quality raw materials with newest
advanced technology by many skilled technicians and professional
workers. We are honest to every customer and responsible for every
machine we sold, we offer great after sales service, anytime when
customer need us, no matter before or after purchase, we are
available online or calling, to make a fast and instant response to
customer.
►we practiced in this industry during all these years, and have
rich on-site experiences too. Any on-site cases, please contact us
for a solution.
►For detailed product specifications, please leave us your email or
mobile no. To send you the catalog. Thank you.
Sino-NSH Oil Purifier Manufacture Co., Ltd
Sino-NSH Oil Purifier Manufacture Co., Ltd. is a high-tech company which is engaged in researching, developing and manufacturing purification equipments. Its parent company, Sino-NSH High-Tech Company, was established in 1992.
NSH regards technical innovation and all-round service as its philosophy. Taking advantage of human resources capital and absorbing domestic and foreign advanced purification technology, NSH is committed in making purification equipments. NSH has been authorized the ISO9001 Quality Management System Certificate and European CE Certificate, now NSH becomes the main manufacture base of purification machines in China.
NSH oil purification equipment series are extensively used in the fields of electric power, petroleum, natural gas, mechanical manufacture, steel, metallurgy, railway and aviation, etc. The main products covering 100 kinds of products can meet different needs of customers. For special demands of customers, we offer particular solutions.
Nowadays, the company’s sales network covers all the provinces in China and exports to more than twenty countries around the world.
NSH products earn its fame on high quality, advanced technology and excellent service in both domestic and foreign markets.
NSH products are not only able to lower customers' cost and secure risk effectively, but also solve the problem of the waste-oil-contaminate environment.
Join hands with NSH, and get accomplishments for you and us.