
Aluminum Alloy Portable Truck Axle Scales 500kg Suiting Different Environment
Special features :
Aluminum-alloy; Ultra thin weighpad design; Easily mounted / unmounted slope; Hermetically sealed, suits different environment; Works both dynamically and statically; Can be used to measure axle weight and whole vehicle weight when two or four weigh-pads are connected together.
IN-100 Vehicle Wheel&Axle scale Weighing Pad PARAMETERS:
Rated load: 500kg | |
Static comprehensive error(%F.S): 0.1-0.3 | |
Rated output(mV/V): 0.40±0.1 | Insulation resistance(MΩ): ≥5000(100VDC) |
Non-linearity(%F.S): 0.2 | Compensated temp.range(℃): -10~+50 |
Error on corners(%F.S): 0.2 | Use temp.range(℃): -30~+80 |
Repeatariy(%F.S): 0.05 | Temp.effect on zero(F.S/10℃): 0.03 |
Zero balance(%F.S): ±1 | Temp.effect on span(F.S/10℃): 0.05 |
Excitation voltage(VDC): 9~15 | Safe overload(%): 120 |
Recommended voltage(V): 10 | Ultimate overload(%): 150 |
Defend grade: IP66 | Netweight(kg): 2 |
IN-100 Vehicle Wheel&Axle scale Weighing Pad DIMENSIONS(mm):
Innovation Electronic Co.,Ltd
INNOVATION ELECTRONIC CO..,LTD Focus on Weighing and Static solution in Packing industry!
In the past tens of years, we established very good relationship with wide range of suppliers and customers in weighing and static products especially in packing industry and also investigated in our own factories of weighing and static, step by step, we get our own special advantages in this market: more accuracy and more economic weighing and static solution for you!
Our weighing solution mainly include:
1. all kinds of load cells( tension and compression load cell, s type load cell, single point load cell, shear beam load cell, those load cells are widely used in kinds of packing industry like food weighing and packing, cement weighing and packing, chemical dosing and packing, pharmaceutical dosing and packing, electronic balance, silo scale, truck scale, etc. )
2. High accuracy bench scale, floor scale, table scale, counting scale. They are widely used in kinds of places that need high accuracy weighing, like small bolts counting and packing, expensive powder and particles weighing and packing, sub-package system,etc.
3. Weighing equipment like dosing machine, checkweigher, roller conveyor scale, etc. This equipment are widely used in weighing and packing production line. The main use is to feed material of set quantity, and double check whether the weight is in the allowed range or not and eliminate the packages that not in allowed range.
The Static solution mainly include:
1. Static charging machine of 20KV, 30KV, 60KV, 100KV. They are wide used in packing material production line, like plastic film machine, bag making machine, IML labeling machine,side weld bag handles, shrink wrapping, electrostatic bonding, etc.
2. Static eliminators of 7.5KV, 6kv, AND anti-static bar,Ionizing air gun, Ionizing Air nozzle, Static foam, etc. These eliminators are widely used in static elimination before packing of finished products. It is to make the packing better, or to remove the dust on the surface of products.
If you have any weighing or static problem especially in packing industry, contact us, we are confident to provide you a suitable and economic Solution!