Crossflow Industrial Water Cooling Towers Automatic Temperature Control

Crossflow Industrial Water Cooling Towers Automatic Temperature Control

COOLING TOWERS:

1) Closed loop
Preventing the impurities into the system to block the cooling tubes, soft water is adopted to avoid overheating caused by scaling to the water pipes.

2) Automatic temperature control
Automatic start/stop spraying system to achieve effective control on the temperature of cycled cooling water, the temperature of the cooling water can be controlled below 40 ℃. With this function, the water & energy cost is reduced to the lowest point with intelligent control to the number of working fans and start & stop of spray pump.

3) No need of water pool and cooling tower
Low cost, small space occupancy, easy installation and move with the welder.

4) Automatic digital display of temperature control
Energy efficient and user friendly.

WORKING PRINCIPLE

1, Working fluid (water, oil o other liquid) flowing inside of the coils, which is enwrapped by spray water on the outside. The heat of water is transferred by coil and become the saturated vapor when meet the water and air.

2, the heat is exhausted out of the tower by the tower by the top fan; water is collected back to the bottom tank and circulates continuously. The spray water is cooled down via PVC radiation fin in the process of circulation, and flow is the same direction with the fresh wind. The coil mainly takes sensible heat travel style.

3, the most benefit of this style is can avoid scale formation on the outside of the coil. And this will apply especially to dealing with high temperature fluid (e.g. 60°C) or the fluid need big temperature difference (e.g. 60°C to 32°C).

Structure

Water cooling : When the fluid temperature is too high(surpassing setting temperature), the spray pump automatically spray the water on the pipe wall and form water film.Then the water film evaporats to absorb heat(latent heat of vaporization).Part of spray water becomes steam and is taken away by flowing air,the rest part becomes water drops and fall on the catch basin for next circulation The fluid inside the coil pipe is in closed loop and won’t lose theoretically.The consumption of spray water is only 0.1-0.2% of unit flow.

Product Application

1. Cooling Tower +Heat Exanger Combination

Closer approach to wet bulb temperature and reduce fouling, highly improve process efficiency

2. Air-Cooled Systems

10-20°C lower process temperatures ,less required space and lower energy consumption

3. Once –Through Systems

Reduces environmental impact ,saving up to 95% of the cooling water

4. Reduced installed Cost And Space Requirements

Effectively combines the function of a cooling tower and heat exchanger into one piece of equipment ,reduce required piping and system complexity.

Shanghai Yanye industrial Cooling Equipment Co., Ltd ( YANYE Cooling ) is a manufacturing plant for provision of various industrial & commercial cooling solutions. The system ranges from the cooling of water to gas, oil and miscellaneous industrial fluid mediums, with a strong emphasis on the manufacturing of closed circuit cooling towers and evaporative condensers.

Located in both Shanghai and Wuxi cities, YANYE Cooling owns one of the largest production scope of modern closed circuit cooling tower and evaporative condenser manufacture in China, covering an area of approx. 30.000 square meters, with an assembly workshop of 18,000 square meters.

With superb quality and exquisite manufacture technique, Yanye Cooling has won wide recognition from customers in the fields of heat treatment, metal & plastic melting, forging, air conditioning, compressor, power plant and chemical industries etc. With great reputation, WELL is honorable to have supplied her cooling systems to AGC(Japan), Saint-Gobain (France), Vaillant (Germany), Sanmina-SCI (USA), Danaher (USA), Stanly (USA), Aichelin (Austria), Mecaplast (France) and China Telecom etc global leading images.

With constant enthusiasm, YANYE COOLING team is working toward the goal of becoming one leading enterprise in the international lines.