
Wireless Microphone Desktop With Language Interpretation Audio Conference Microphone
Features
1. Stylish, low profile design with touchable interface
2. Standard CAT5e and RJ45 connectors are used in CLEACON series to
provide more convenient on project and maintenance.
3. The connection of MIC units are either hiding underneath or from
the rear of the unit, makes it convenient for different request of
installation,
4. OLED screen, providing excellent brightness, contrast, wide
viewing angle but low power consumption
5. Internal high fidelity loudspeaker
6. Built-in interpretation channel selector
7. The chairman VIS-DIC-T can set as interpreter, delegate.
8. Head-set interface in both sides with volume adjust
9. Line-in interface which allows microphone or other line-in
device like cell phone, laptop to pass audio through to perform
teleconference
10. The unique AUDIO-LINK digital ring network technology achieve
full-digital signal transmission and processing, completely avoid
the RF interference from cell phone or similar devices.
11. Strong system robust by the "Hand-in-Hand-Loop-Network"
connection method.
12. Timer on display to set certain time for each delegate to
speak, will remind user or close the MIC automatically
13. All units can be configured as Chairman or Delegate unit
through software settings based on model VIS-DIC-T.
Functions
Compliance with IEC 60914, GBT 15381-94
The unique AUDIO-LINK digital ring network technology achieve full-digital signal transmission and processing, completely avoid the RF interference from cell phone or similar devices.
One CAT5e cable to transmit 64 channel audio and other signals
High fidelity sound by zero loss audio transmit technology, 48K audio sampling frequency, 20Hz~20KHz response frequency
"Hand-in-Hand-Loop-Network" connection makes the system always working perfectly no matter changing discussion unit or having any malfunctioned units
This system assigned to each unit independently ID to avoid duplicate ID conflict
Support AGC(Automatic Gain Control)/AFC(Adaptive Feedback Cancellation)/ANC(Active Noise Control )/Mix (Auto-Mix) technology
Build-in functions for intercom
Hot-swap for any system unit, and the controller has auto-recovery function
Precise directional microphone head with anti-wind microphone foam cover, with two-color LED indicator
Button for MIC ON/OFF, Priority & Apply Answer button for chairman unit
Built-in high fidelity speakers, it automatically mutes to prevent howling when press MIC ON
Head-set interface in both sides with volume adjust
Without using PC software, our conference controller still owns following settings:
Limit on the number of speaking persons: By Setting the number of active units at the same time(Number is 1/2/4/6/ units)
Discussion modes:
"OPEN" Free for all, limited by the active units setting by controller, "OVERRIDE" First in First out,"FREE" Turn on the MIC freely up the max. quantity, "APPLY" To apply then to speak
Work with our HD camera and video matrix switcher, it applies camera auto tracking function
The unit showing real time on the screen, and count-down timer for speaking person.
Control & Indicators
Each unit with two-color LED indicator, red for speaking on
microphone, green means need acceptance from chairman to speak
128x32 OLED display with volume bar, clock, time span of microphone
activating, MIC ON/OFF etc and other information.
Indicator for Volume adjustment
Indicator for MIC ON/OFF
Chairman unit with priority button and consent button for the
delegates
Interfaces
Pluggable microphone base
2x 3.5mm stereo headphone jack
1x 3.5mm stereo input jack
2x RJ45 connectors
VISSONIC ELECTRONICS LIMITED
VISSONIC Electronics, www.vissonic.com, is a PRO AV company located in Guangzhou, mainly developping high tech audio visual devices including: Digital DSP Conference system, 5G wifi wireless conference system, wireless translation system, matrix switchers for standalone and modular, and programmable controller.
Our mission is to develop and manufacture the most comprehensive and innovative audio visual products for our clients. We provide the best performance/price ratio products because it could give you satisfaction just from the time you use them, we believe the good design with cutting edge technology on products will provide value to all our partners and end users. Listen to your demands, we fulfill it
VISSONIC Electronics is located in Guangzhou Huangpu Development Zone. We are a professional manufacturer of audio and video products in Guangzhou, with its own brand VISSONIC, is a collection of R & D, production, sales of high-tech enterprises. Our main task is to develop and produce high-performance and innovative audio and video products for our customers.
In recent years, VISSONIC has been adhering to the core of customer demand, in the domestic and foreign market development, at the same time, for many countries to provide conference solutions, quality, dedicated services and high-quality products have won the trust and praise of many enterprises. Also gradually set up a good brand. We have also established after-sales service system, in the use of the product is any problem, after sale will be professional and timely solution to your problem. At the same time, three years long warranty, so that customers better use our products.
Net control distribution system
Signal management
Conference system, wireless discussion/translation system
Over 10 years experienced Sales/R&D people in Audio/visual
industry, know well about what is most needed products in this
field.
Deeply combine traditional audio/visual products with network
communication, AV/IT become the core technology into our creative
solutions
We are proud of turning your constructive ideas into reality by
our strong design/research/production ability, developing new
methods on cooperation is our goal.
By providing our clients the simple/flexible products to use
By providing our clients the prompt technical support
By providing our clients the gateway of latest technology in trend