Constant Voltage LED RGB DMX Controller For 3CH LED Fixture RJ45 Interface Available

RGB LED DMX512 decoder constant voltage 12-24V for 3CH LED fixture

Model : DE8000

SUMMARIZE:

Thank you for using DMX512 Decoder series.It adopts the advanced micro-computer control technology , it converts the DMX-512/1990 standard digital signal adopted widely in international to the analog control signal.Output 1~3 Channels for option and each channel able to achieve 8bit/16bit levels of brightness , and also it can be used as the connector of PC digital-light controller and analog light modulator. It is mainly used for the controlling of buildings & lights applied LED .

Product Features:

◆Meets DMX512/1990,with RJ45 interface.

◆256-levels brightness,full-color with driver controls

◆Output 3 channels,MAX 4A per channel.Total current is 12A.

◆Can achieve asynchronous color changes effect under working with controller.

◆Cooperate with control system, can realize rich change effect.

◆Setting the DMX address freely

◆Modularizing and can be matched with different LED module neatly.

◆Custom-made.

Product Size :

Size:L160*W47*H22mm

Weight :200g

Product instructions:

Diagram:

Note :

DMX-512 control signal connection

◆ DMX signal cable is made of twisted pair ( line ) , DMX signal includes positive and negative end , in pressure welding DMX signal line plug should pay special attention to polarity . DMX512 controller output signal positive , signal negative , signal ground with DE8000 input interface corresponding connection .

◆ DMX5000 output and DE8000's transmission lines can't be over 300 meters .

◆ DMX5000 each interface can with not more than 16 pieces of DE8000. eight output interface . Through the JBLED FLASH light making software and can with computer on line control. Realize infinite contact the DMX lights .

◆ When connected 32 pieces of DE8000 , DMX signal must add a signal amplifier RE2000 . RE2000 Cascade can't more than 4 PCS.

Shanghai Jibang Electronic Technology Co., Ltd. is a hi-tech company which focuses on the R&D of LED control and dimming systems. At present, our products of LED controllers and dimmers occupy domestic markets.

Our core team has been engaged in the research and development of LED control system since 2011. Our company was established in 2011 with the register capital of RMB10 million. Currently, we have 120 employees in total, including 20 engineers.

At present, our yearly production capability has been achieving 1 million units of controllers and dimmers. Our company owns 3 sets of Tokyo Juki automatic placement machines, 1 set of full-automatic printing machine, 1 set of semi-automatic printing machine, 8 sets of hot-air reflow oven machines, 1 set of automatic shearing machine, 1 set of automatic cutting-feet machine and several other small equipment.

Our company owns DALI, 0-10V/1-10V, DMX, triac dimmer and controller series which can match with high voltage and low voltage LED lighting applications. All these products can meet various dimming demands in different occasions which include commercial lighting, hotel lighting, office lighting, home lighting, as well as outdoor lighting.

The headquarters of our company is located in Shanghai. We also have several agencies in Shenzhen, which can help our customers by means of techniques and services without delay.

Wish we can fight together and share the glory in the coming future!