Stainless Steel Coil Stamping Pneumatic Punch Press Feeder Equipment High Processing

Pneumatic feeder, stainless steel coil stamping, Ruihui feeding equipment processing

The standard installation accessories of the pneumatic feeder include: one mounting plate, one set of mounting screws, one set of three points, one high pressure pipe, one set of feeding rods and one set of sealing rings. The mounting plate is used to put Ruihui pneumatic feeder. The main body is fixed on the side of the punching table.

The mounting screws are used to fix the mounting plate; the three-point combination is used for water filtering, pressure regulation, and lubrication; the high-pressure pipe is used to connect the external air source; the feeding bar is used to control the feeding time of the pneumatic feeder; the sealing ring is a wearing part to avoid Air leakage caused the feed to be inaccurate.

After the installation accessories are checked, the installation can be started. The installation of Ruihui pneumatic feeder is divided into five steps:

1. Ensure the position of the pneumatic feeder is installed according to the requirements of the stamping process. The pneumatic feeder can be used for feeding or pulling, so the specific installation location is determined according to the actual needs of the customer.

2. Place the mounting plate on the side of the pneumatic feeder that needs to be installed on the punching machine, and draw the screw hole position. Then fix the mounting plate according to the hole position.

3. Install the pneumatic feeder mainframe body according to the position of the mounting plate.

4. Install the rod-operating device on the punching table on the punching table according to the position of the floating rod on the main body of the pneumatic feeder, so that it is directly above the floating rod.

5. Fix the three-point combination with the screw at the appropriate position in the lower part of the punching machine body, then connect the external air source to the three-point combination inlet, connect the main part of the pneumatic feeder with the high-pressure pipe at the air outlet, and then inject the three-point combination into the lubrication. The oil completes the installation process of the entire air feeder.

products:

Specification:

Straigtening performance:

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi

RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the original design standard, and into each manufacturing process. In 20 years has accumulated experience and excellent design ability of Japanese engineers guided ruihui highly responsible for Industry and ruihui strong executive team, created a batch of well-known auto parts manufacturers, allowing them to reach the high level in same industry，and investment less.

Customer case

Manufacturing industry; the United States Lear, Honda factory, Ford factory, GAC Group, Chongqing Changan, Wuhan Shenlong, BMW Brilliance, FAW Volkswagen, Beijing Hyundai.

And other household appliances manufacturers; such as GREE, Haier, Midea, Chigo Air conditioning.

hardware manufacturers; such as the United States Southco, are Zhongtai industrial manufacturers success cooperation case.

RUIHUI QUALITY is not the best in the world, and the price is not the cheapest. But we can provide excellent products to help you defeat your competitors.

Products: Feeder machine, Straightener machine, Uncoiler machine, Decoiler with Straightener, 3 in 1 NC Straightener Feeder, Coil handling system, Transfer system, Robot System, to meet the market needs of customers, improve work efficiency, reduce the burden of enterprise management personnel, maintenance of production safety and the customer staff made a significant contribution.

At present the company to further develop the market, at the end of 2017, the total investment reached 30 million USD, plant area of more than 20 thousand square meters, in order to meet the demand on the market and lay a solid foundation after.

Why choose us?

1^st,We have a high level of technical research and development team;

2^nd,We can provide the design and planning of the whole plant to realize the turnkey project;

3^rd, our philosophy: quality is the social responsibility;

4^th,our products have been recognized by the market, in the major automotive OEM, home appliance industry, hardware industry has been applied;

5^th,We have a highly effective after-sales service team and get customer approval.