
20 dBm LTE Wide Band Signal Repeater cover 70dB gain 1000sqm
Description
Lenolink provides a series of products to support different
applications and customized your requirement. The output power
level is 10dBm, 20dBm, 25dBm, 30dBm and 43dBm.
This LTE mobile phone signal amplifier significantly improves the performance of any cellular device experiencing weak signal inside of buildings! It provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. it can help reduce drop calls and improve GSM voice communication quality. Using a large external antenna and an indoor repeater, this GSM signal booster boosts signals sent by both your phone and the cell tower.
Design Advantage
1. Support wide band to cover all operators.
2. Manual gain control (MGC) available for both uplink and down
link to adjust the gain value for proper coverage during
installation or maintenance.
3. To maintain safe and specific output signal levels and give
alarms on self-oscillation, the repeater has built-in AGC and ALC
circuits, which can automatically control the gain of the repeater
depending upon the strength of input signals.
4. Optional auto shut off design available for both uplink and
downlink to avoid serious interference to network effectively when
the repeater is in deep self-oscillation or very strong input
power.
5. Very low power consumption.
6. Support single, dual, triple and quad systems with one housing.
7. Metal housing, professional design.
8. Comply with CE and FCC standard.
Electrical specification | Uplink | Downlink | |||
Frequency Range | WCDMA | 1920 ~ 1980 MHz | 2110 ~ 2170 MHz | ||
Max .Gain | ≥ 55dB | ≥ 60dB | |||
≥ 65dB | ≥ 65dB | ||||
≥ 65dB | ≥ 70dB | ||||
≥ 70dB | ≥ 75dB | ||||
≥ 75dB | ≥ 75dB | ||||
≥ 75dB | ≥ 80dB | ||||
Max .Output Power | ≥ 10dBm | ≥ 10dBm | |||
≥ 12dBm | ≥ 15dBm | ||||
≥ 15dBm | ≥ 20dBm | ||||
≥ 15dBm | ≥ 23dBm | ||||
≥ 20dBm | ≥ 27dBm | ||||
≥ 20dBm | ≥ 30dBm | ||||
Band width (-3dB) | Wide Band | ||||
MGC | ≥ 31dB / 1dB step | ||||
ALC | ≥ 15dB, auto shut off after 15dB | ||||
Gain Flatness | GSM&CDMA | Tpy≦ 6dB(P- P); DCS,PCS≦ 8dB(P-P) | |||
WCDMA | ≦ 2dB/ 3. 84MHz,Ful l Band≦ 5dB(P-P) | ||||
Noise Figure | ≤6dB | ||||
VSWR | ≤1.8 | ||||
Group Delay | ≤0.5μs | ||||
Frequency Stability | ≦ 0.01ppm | ||||
Spurious Emission & | GSM Meet ETSI TS 151 026 | ||||
WCDMA Meet 3GPP TS 25.143 | |||||
CDMA Meet IS95 & CDMA2000 | |||||
WCDMA System | Spurious Emission Mask | Meet 3GPP TS 25. 143 | |||
Modulation Accuracy | ≦ 12.5% | ||||
PCDE | ≦ -35dB@Spreading Factor 256 | ||||
CDMA System | Rho | ρ> 0.980 | |||
ACPR | Meet I S95 & CDMA2000 | ||||
LED Alarm | Standard | ||||
Power LED | Green light when power on. | ||||
ALC LED | Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB, LED off after 5 seconds red color | ||||
Mechanical Specifications | Standard | ||||
I /O Port | N-Female | ||||
Impedance | 50 ohm | ||||
Operating Temperature | -25ºC~+55ºC | ||||
Environment Conditions | IP40 | ||||
Dimensions | ≤20dBm | 250x125x52mm; | |||
>20dBm | 250x220x52mm | ||||
Weight | ≤20dBm | ≤ 2.0Kg; | |||
>20dBm | ≤ 3.2Kg; | ||||
Power Supply | Input AC90~264V |
Our factory:
Lenolink Telecommunication Co.,Ltd
Established in 2014, Lenolink telecom is professional mobile solution provider for indoor and outdoor coverage to cellular operators and end users. We are located in Shenzhen China where is telecommunication industrial center of China. Lenolink has a solid force of R&D team, over 25% of our employees are dedicated in product research&development and most members have rich related industrial experience.
Covering an area of 9000 square meters, we now have four production lines, over 20pcs Agilent network analyzer, 10pcs intermodullation instruments and other professional machines. Our annual sales figure exceeds 5 million USD in 2017. Lenolink provides complete end-to-end coverage solution for all mobile network standard, such as GSM, DCS, WCDMA and LTE. Our products include RF combiners, RF filters, coaxial cables, jumper cables, RF repeaters, antennas, and the provision of relevant services.
The company obtains the goal of becoming a leading force in the field of mobile product R&D, manufacturing and service providers of mobile communication globally. With years of effort, Lenolink has established business relationship with more than 30 frequent customers located in asia pacific, america, europe and middle east, such as China Mobile, China Unicom, Indosat, Nokia.