Outdoor P8 Front Service LED Display 1920HZ With 8000 Cd/Sqm Brightness

Outdoor P8 Front Service LED Display 1920HZ With 8000 Cd/Sqm Brightness

P8 Outdoor smd Front Service LED Display Sign Features:

1. Dual-maintenance, from both the front side and the rear side. People usually use its front maintenance

function.

2. Easy maintenance, easy to disassemble the modules with a hexagonal screwdriver.

3. No screws, easier to disassemble the modules and mount the modules on the cabinet.

4. 10mm pixel pitch is suitable for small banner screen.

5. New plastic cover with new mold, smaller module gaps and better screen flatness.

SPECIFICATION OF C8 Outdoor Front Service LED Display

Advantages OF C8 Outdoor Front Service LED Display

1. Front Service Design: Unlike traditional front service design with hydraulic pipes, which cost more on

project and with low IP rating due to the conjunction of structure. C6.67 LED Sign is like normal cabinet

design, but bigger size. The IP rating can reach to IP65. All the modules, cards and power supply can be

maintained from front. The whole sign can be attached to the wall and no need maintenance space at

back

2. Convenient Sign Design, Easy to Install: C6.67 LED Sign is easier to install, not picked on installation

environment. Most structure frames are integrated on the sign, no complicated steel structure needed, just

fix the sign to the pole or to the wall. Extremely save installation time and labor cost

3. Higher IP Rating, Perfect For Outdoor Advertising: Thanks to special waterproof cabinet structure (no

rear doors), C6.67 sign screen can be IP65 waterproof. Aluminum material and ventilation design

make sure perfect cooling effect. All these key features are critical for outdoor commercial advertising

activities. No matter it is a small size LED screen or a huge commercial LED billboard, C6.67 will present

you the trustworthy quality and high profile screen performance

Product Introduction

Where are the screen usually used?
This series is usually used for special fixed led display, which has small space behind screen so that cannot provide with a maintenance access, so they can only maintain in front. They are widely used in Advertisement, Hostel, School, Stations, etc.

The advantages of this kind of display:
1. Easy installation and light weight can make it amount in the wall or lift against the wall.
2. Front access design allows to make thicker LED display, which is suitable for some special locations where there is no more space for rear maintenance.
3. Cabinet front service type is suitable for small size screen while module front service type is suitable for any size.

The main characters of this kind of display:
1. Good heat dissipation capability
2. Strong water-proof
3. Strong high temperature of tolerance
4. Double face maintenance design of Lock and Magnetic suction
5. No cabinet - Module front service type has no cabinet, which can easily make a screen with modules.
6. Use Save power drive IC- save around 25-36% power, maximum power consumption 500w/m2
7. Thin screen- ordinary screen need a 450mm- 650mm maintenance access in order to rear maintenance, but front opening service type don’t need maintenance assess.
8. High refresh rate and high gray scales
9. Good quality PCB suite

Shenzhen Lecede Optoelectronics Co., Ltd. Is the leading supplier of LED display solutions, which has been specialized in R&D, manufacturing and marketing of LED Display. Located in our own industrial park, LECEDE covers a district of more than 25,000 M² in one block. We could ensure production capacity of more than 10,000 square meters per month for the LED displays, thanks to our well equipped automatic production lines, and skilled workers.

Lecede focuses on quality and service, and other than considering the displaying effect and cost factors, we pay more attention to the long-time using stability of products and customer satisfaction. All the production process from technical research and development, design, test production, design verification, design quality test, material selection, trial production and mass production of every product has a set of rigorous standard control procedure and norm. In the aspect of management, we have independently designed a set of fast and effective management system from order receiving, production control and scheduling, material purchasing, process management, delivery, after-sales and quality analysis to ensure to provide the best price, quality, delivery and service for customers.

During the past decade's development, We always run after standardization in design，processes of manufacturing and techniques, material systems, products line. Now we have built up a complete-ly production system.

Standardization ensure our product with good quality which can meet with different markets and customers.We also provide OEM&ODM service according to the requirements of our customers. “Quality, Efficiency, Comprehensive consideration” are emphasized for creating value for customers.

We have continuously focused on developments of new led display products, with more and more investment, and technical efforts; With excellent, qualified products, and outstanding services, Lecede has been highly praised by clients of domestic and overseas. We export more than 50 countries and districts, with more than 1, 000 projects built there, such as the USA, Germany, Russia, Ukraine, Spain, Austria, Slovakia, Poland, Turkey, Cyprus, Israel, Mexico, Argentina, Chile, Bolivia, Colombia etc.

Hope we can make wonderful LED displays for you!