NPT3/8 MAX120℃ BRASS WATER REPLACE ELECTRONIC TEMPERATURE SENSOR

Product Description

Water temperature sensor is installed on the engine cylinder or head of the Water Sleeve, direct contact with cooling fluid for measuring the temperature of the engine's cooling fluid. The Temperature Sensor Used in the cooling liquid temperature meter is a negative temperature coefficient thermal resistance, the temperature increases with temperature, and a wire is connected with an electronic control unit.

The electronic pressure sensor for automobiles has been developed by our technicians for several years, which is an innovative structure, there is great improvement of its performance. In addition, we obtained certificates of Utility Model Patent. (cert No.201721626002.7 and 201721626071.8).

Application

It is widely used in engine water tank temperature detection of automobiles,

ships and generator sets. It has temperature detection and temperature alarm function,

wide product specifications and functions to choose from. Customized products according to customers' needs.

Features:

A direct replacement for faulty or damaged after market oil/water temperature gauge sensors.
A Universal 1/8" NPT oil / water temp sensor, temperature ranges from 0-150c / 0-300f This is a one wire sensor, one for the signal to the gauge the sensor is earthed through the thread when screwed into the engine/sandwich plate.
Single connection sensor (brass outer case is earthed)
Temperature reading range 0 - 150 Celsius
Range 0~150 c ( 0-300f )
Universal Fit on all Imported and Domestic Cars

Specifications:

Thread: NPT1/2
Material:Brass
Rated power for alarm switch: 1.2W~3W

The temperature alarm tolerance: ±3℃

Our Service

1. High quality with competitive price & stock.

2. Product Warranty: 12 Months
3. Sample order or Small order Accept,

4. OEM Manufacturing welcome: Product, Package...

5. Fast Delivery: delivery within 7 - 10 working days

6. Easy to pay, various payment methods.
7. We will reply you in 24 hours. If you don't receive our reply, please kindly re-sent mail or give a call any time.

8. You may consider to send the defective item via economical way, and we can send back together with your next order.

Company Introduction

Since its establishment, Wuhan Chidian Technology Co., Ltd. has always regarded product quality as the core competition of the company in market. It is precisely because of product positioning and the strong product quality awareness of all employees that the company continues to develop and is getting better and better.

In the auto parts industry, there are two key factors of product quality control, one is raw materials of the components, and the other is the process control of the production.

First, in the purchasing of raw materials, high quality is the only choice for our production.

1. Thick Film Resistors: All high-precision, high wear-resistant ceramic resistance.

2. Spring: Imported spring steel.

3. The alarm board developed by our chief engineer that is exclusively owned by our company.

4. Media separator: all fold resistant, high temperature resistance, anti-aging, made of corrosion and other excellent properties of rubber and high-strength fabric and other polymer materials.

Second, the product debugging and testing equipment is independently researched and developed by the company. It has uniqueness and leading technology to automate the testing process and intelligently judge the testing results.

Third, in the quality control process, every product will be tested three times before delivery.

Stage I: preliminary adjustment of the product. Which includes two aspects:

1. To debug the resistance value of the detection points

2. To test reliability of detection point for the entire process from zero to the full scale pressure. Prevents the occurrence of momentary short-circuit between two detection points due to dust, fibers, other impurities on the circuit board or poor manufacturing of the circuit board, mainly due to the sudden abnormal occurrence of the meter pointer.

Stage II Semi-final product testing include 4 aspects:

1. To test the resistance value of the detection points

2. To test reliability of detection point for the entire process from zero to full scale pressure

3. To debug and test the pressure value of the alarm

4. To test reliability of detection for the entire process from zero to alarm value.

Stage III Final product testing include four aspects:

1. To test the resistance value of the detection points

2. To test reliability of detection point for the entire process from zero to full scale pressure

3. To test pressure value of alarm

4. To test reliability of detection for the entire process from zero to alarm value.

Regardless of the size of the company, whether the funds are strong or not, the quality control of the product is life of the company and our responsibility. We are confident that we will not produce an unqualified product and will not allow an unqualified product to out of factory.

Yours satisfaction is the motivation of all of us!

PACKING &DELIVERY

​

• PLEASE CONTACT US

Wuhan Chidian Technology Co.,Ltd is a professional manufacturer of auto sensors in Wuhan Economical & Technological Development Zone of China. Since 2009 with more then 25 years of professional technical experience. also we have been certified by RoHS and REACH; ISO/TS16949... ,

Our factory have obtained 6 product invention patents and 15 utility model patents to ensure the precision and high quality production of our products in all industries

Wuhan Chidian focused on development and production of pressure sensor, temperature sensor, fuel level sensor, speed sensor etc.

Wuhan Chidian have first-class technical team, with strong R & D capability and rich experience in production management. In the production line, we have the most advanced and completed sets of equipment to ensure product quality and reliability.

Wuhan Chidian brings together the top professional talents and technology. The software and hardware of our advanced testing equipment designed by our professional and technical personnel. We have obtained several utility medel patents from National Patent Office. 

We provide customers with affordable, high-quality products. In order to achieve the advantages of Asia, the full benefit in terms of quality and cost, procurement of key components from Germany and the United States, and the production and manufacturing in China. We have the best supply chain in China and parts manufacturers, and a solid record of quality and innovation, to prove that our 10-year performance of the sensor.

Quality product performance and good reputation, our products are not only successful sales in China, and have been exported to more than 50 countries and regions in the world, including: Germany, Japan, Italy, Russia, Japan, South Korea, Turkey, Brazil , India, the United Arab Emirates, Saudi Arabia and other countries, the products are subject to a great welcome and praise.

Looking forward to the future, the company is moving into the fast lane of development and will continue to adhere to the concept of creating quality products to serve global customers. Our mission is to be the most valuable and competitive automotive sensors in the world.