
High weatherability electrophoretic paint for Agricultural machinery
Product Introduction :
HR-4000LB/HR-4010 Epoxy acrylic Gray Cationic Electrocoat is HLS Paint (Shanghai) Co., Ltd., the eighth generation of independent research and development of electrophoretic coating. |
This coating by epoxy acrylate modified, the film also has excellent corrosion resistance and weatherability, smooth appearance and full, suitable as a base topcoat system. In addition, the lead, cadmium, chromium, mercury and other heavy metals, two-component, water dispersible resin, at the same time, previous generations of the product characteristics, have good adaptability to the galvanized steel, almost can be applied to all metal coating |
such as: cold hot rolled steel, galvanized steel, aluminum, zinc Aluminum Alloy plate, stainless steel plate |
This product features shown below:
①,The appearance of the coating is flat, delicate, smooth.
②,Good stability of bath can adaptable for a longer updating cycle.
③,The bath has strong anti-shrinkage and anti-pollution ability.
④,High penetration and good uniformity of internal and external.
⑤,Good weather resistance, very suitable for car body, car chassis, electric, three wheeled motorcycle frame and other industries.
The main component Matrix resin:
Matrix resin: Acrylic modified epoxy resin | Curing agent: Fully enclosed multi isocyanate |
Neutralizing agent: organic acid | Solvent: alcohol ether |
Additives: surface active agent, prevent shrinkage cavity agent | Pigment: carbon black, kaolin, antirust pigment |
Filling tank proportion and method :
⑴ Bath preparation
Ratio:
Resin 1400.00
Paste 233.00-175.00
NHF-01 10.00
DI water 1785.00
Total 3428.00-3370.00
⑵ Ripening conditions
Sample quantity: 3000~4500g
Container: 5L (Diameter 16cm)
Tank temperature:30 ±2℃
Time: 24~48Hr
Mixed conditions: impeller diameter 8cm (speed 200rpm)
(3) Coating conditions
Experimental panel: phosphated cold-rolled steel plate
Tank temperature: 28-35℃
Pole ratio: A/C = 1/2 ~ 1/4
Distance of electrodes: 15cm
ED time: For full immersing 1-3 minutes ( 20 seconds soft start)
Baking conditions:(165-175)℃×(20-30)min (Keeping temperature of parts coated)
Storage, packaging and transportation :
This product is a water-borne industrial coatings, non-hazardous, non-inflammable and explosive products; transportation to prevent direct sunlight, avoid freezing (>5℃ ); Packaging for 50/60/200L Plastic barrel; in the transport and storage of drums should be maintained clean, avoid charging the dirt brought in on drums during filling tank, again checked and confirmed that the quality of products, including paste resin, emulsions and additives should be indoor storage, good ventilation, dry, protect against freezing and overheating, the storage temperature should be controlled at 5~35℃, products from the date of production, over shelf, experimentation is required to determine whether can continue to use.
HLS Coatings (Shanghai)Co.Ltd
Since its foundation in November 2003, HAOLISEN has been adhering
to the vision of “Advocator and Innovator of Waterborne Coating
Solutions” and committed to the development and production of
industrial electrophoretic coatings by investing lots of human,
material, energy and financial resources over more than a decade.
By 2009, HAOLISEN has become theinfluential and famous brand
manufacturer of electrophoretic coatings in China. With its
constant pursuit of innovation, HAOLISEN persists in scientific
research and innovation in order to better create values for the
society and provide customers with higher quality products and
service as well as efficient coating solutions. HAOLISEN is
committed to maintain the absolute leadership of its core
technology in the industry, which endows us with honourable social
responsibilities.
HLS's development:
2003 HLS Coating (Shanghai) Co., Ltd. was established.
2005 Its sales volume exceeded 100 million RMB.
2008 It transformed the white goods industry, and was rated as “Excellent Supplier” by Haier, Midea, etc.It created the E+P coating process system for oil heaters in domestic household appliance industry.
2009 It created the E+P coating process system for radiators in domestic household industry.
2010 Its white and colored high-end electrophoretic coatings account for a market share of 90% in China.
2012 It established HLS Chemical Technology (Jiangsu) Co., Ltd. in Nantong of Jiangsu Province.
2013 Its upgraded high-performance electrophoretic coating products have been highly recognized by the automobile manufacturing industry, and obtained the technical accreditation certificates for basic
automobile materials of China FAW Group, Chang'anAutomobile Group, Dongfeng Automobile, Volvo
and other auto makers.
2014 It has registered in EU and Japan and established its overseas business division, and is now going global.
2015 Through cooperating with Fudan University, it has established “Joint Research Center of New
Waterborne Surface Treatment Materials”It has been recognized by Sany Group for waterborne
industrial coating materials.
2016 China's first book of industry technology compiled by a company - Modern E-Coating Encyclopedia
2017 SAIC Volkswagen's certification for electrophoretic coating and its supply thereto; Foton's certification for water-based automotive topcoat and its supply thereto; hosted "Gather to Paint Common Prosperity- Surface Finishing Total Solutions Forum".
2018 HLS Chemical Technology (Jiangsu) Co., Ltd. went into operation.
2020 It is certified by SAIC-GM and can be supplied to SAIC-GM system