
Solution for the domestic air conditioning electrophoresis paint
Product Introduction :
HS-5400LB/HS-5400 White epoxy acrylic cathodic electrophoretic coating for auto is the 8th generation electrophoretic coating researched and developed by HLS Paint (Shanghai) Co., Ltd. in cooperation with Germany HS International Chemical Industry Group,and get the national invention patent and the Shanghai science and technology commission of high-tech transformation project. |
It represents modern technology of cathodic electrophoretic coating that is environment-friendly with high property and low cost. Such coating does not contain heavy metal like lead, tin, cadmium and mercury etc. It is a two-component, water-dispersed resin. The coating that does not contain tin element meet the latest environ-mental regulations of European Union, North America, Japan and other requirements in advance, which is the inevitable trend of future environ-mental coating and low cost; meanwhile, it took in features of previous products, and can adapt galvanized steel sheet perfectly, almost can be applied to foundation coating of all metal, |
such as: cold and hot rolled steel sheet, galvanized steel sheet, aluminum products, zinc-aluminum alloy sheet and stainless steel sheet etc. |
This product features shown below:
1,Simple control of bath and wide operation range is suitable for the operation specification and site equipment for different customers
2,Low curing temperature, coating yellow degeneration resistance is good, suitable for electrodeposition primer, and then to spray or paint coating process, such as: oil heater, radiator, heater, lamps and lanterns, machinery, home appliances and hardware products and other industries
Main ingredients:
Solvent: alcohol ether
Matrix resin:acrylic modified epoxy resin
Curing agent: separation type fully enclosed isocyanate
Filling tank proportion and method:
⑴ Bath preparation
Ratio:
Resin 800.00-1000.00
Paste 200.00
DI water 2000.00
Total 3 3000.00-3200.00
⑵ Ripening conditions
Sample quantity: 3000-3200g
Container: 5L (Diameter 16cm)
Tank temperature:30 ±2℃
Time: 24~48Hr
Mixed conditions: impeller diameter 8cm (speed 200rpm)
(3) Coating conditions
Experimental panel: phosphated cold-rolled steel plate
Tank temperature: 30±2℃
Pole ratio: A/C = 1/2 ~ 1/4
Distance of electrodes: 15cm
ED time: For full immersing 1-3 minutes ( 20 seconds soft start)
Baking conditions:(150-170)℃×(20-30)min (Keeping temperature of parts coated)
Bath on site management project :
Good bath data and coating quality, from the strict parameters management and maintenance of equipment, production line according to its own reality time situation, can have different management project and specifications, recommend the construction parameters see the table below for reference:
Classification | Project | Control Data | Testing frequency | |
New bath | Anolyte | |||
Electrophoresis tank | Ratio | 1:(4-5) | -- | |
Ripening time | 24-48 | -- | ||
Solid ( 120 ℃ /1h ,% ) | 12±2 | -- | once a day | |
PH | 5.3-5.8 | 2.0-3.5 | once a day | |
Conductivity ( μs/cm ) | 900±400 | 1000±500 | once a day | |
P/B | 0.35-0.45 | once a week | ||
Solvent content (%) | 1.2-2.0 | once a week | ||
Liquid level Fall head (cm ) | 10-15 | once a day | ||
ED voltage( V ) | 0-300 | once a day | ||
Break voltage ( V ) | ≥350 | once a week | ||
Bath temperature ( ℃ ) | 30±2 | once a day | ||
ED time( S ) | 60~180 | once a day | ||
UF - 1 Tank | Solid content (%) | ≤2.0 | once a day | |
UF - 2 Tank | Solid content (%) | ≤0.8 | once a day | |
Baking furnace | Provisions furnace temperature( ℃ ) | 150-170 | once a day | |
Curing conditions | Drying temperature | (150-170) ℃ x (15-20)min (With content holding time) | once a day |
Specification statement:
This manual contains information and recommendations are based on our current knowledge and experience, accurate to the date of publication so far. It cannot be used as a guarantee or commitment, in any case, responsibility for users to decide on the use of this product is intended availability. We remain in the process or new development within the scope of the right to change product specifications. Because we cannot control the construction conditions, hope through customers own experiments to determine satisfaction with the final results.
If you want to learn more about HLS coating products, please contact Sales Department of Shanghai HLS now
HLS Coatings (Shanghai)Co.Ltd
Since its foundation in November 2003, HAOLISEN has been adhering
to the vision of “Advocator and Innovator of Waterborne Coating
Solutions” and committed to the development and production of
industrial electrophoretic coatings by investing lots of human,
material, energy and financial resources over more than a decade.
By 2009, HAOLISEN has become theinfluential and famous brand
manufacturer of electrophoretic coatings in China. With its
constant pursuit of innovation, HAOLISEN persists in scientific
research and innovation in order to better create values for the
society and provide customers with higher quality products and
service as well as efficient coating solutions. HAOLISEN is
committed to maintain the absolute leadership of its core
technology in the industry, which endows us with honourable social
responsibilities.
HLS's development:
2003 HLS Coating (Shanghai) Co., Ltd. was established.
2005 Its sales volume exceeded 100 million RMB.
2008 It transformed the white goods industry, and was rated as “Excellent Supplier” by Haier, Midea, etc.It created the E+P coating process system for oil heaters in domestic household appliance industry.
2009 It created the E+P coating process system for radiators in domestic household industry.
2010 Its white and colored high-end electrophoretic coatings account for a market share of 90% in China.
2012 It established HLS Chemical Technology (Jiangsu) Co., Ltd. in Nantong of Jiangsu Province.
2013 Its upgraded high-performance electrophoretic coating products have been highly recognized by the automobile manufacturing industry, and obtained the technical accreditation certificates for basic
automobile materials of China FAW Group, Chang'anAutomobile Group, Dongfeng Automobile, Volvo
and other auto makers.
2014 It has registered in EU and Japan and established its overseas business division, and is now going global.
2015 Through cooperating with Fudan University, it has established “Joint Research Center of New
Waterborne Surface Treatment Materials”It has been recognized by Sany Group for waterborne
industrial coating materials.
2016 China's first book of industry technology compiled by a company - Modern E-Coating Encyclopedia
2017 SAIC Volkswagen's certification for electrophoretic coating and its supply thereto; Foton's certification for water-based automotive topcoat and its supply thereto; hosted "Gather to Paint Common Prosperity- Surface Finishing Total Solutions Forum".
2018 HLS Chemical Technology (Jiangsu) Co., Ltd. went into operation.
2020 It is certified by SAIC-GM and can be supplied to SAIC-GM system