
Single Channel Digital Display DMX Signal Splitter & Address Dispenser RE2502
Summerize:
RE2502 is a digital display DMX512 address dispenser with function of digital lighting control signal amplification and distribution output. Each input/output interface adopts high voltage isolation technology, applied to DMX512 signal via remote transmission attenuation after the plastic amplification processing, as well as various distribution output interface, between input interface and the distribution between output interface to complete electrical isolation use occasion.
As a result of each interface between independent isolation, and it can be avoided by controlling circuit, scanner, silicon box problems and burned precision digital light console, to ensure the safe operation of digital light console, at the same time also guarantee DMX signal can normal transfer to all kinds of lighting equipment, so as to improve the whole digital lighting control system reliability.
Features:
1), DMX address dispenser with signal amplification, single channel
distribution output.
2), Each input/output interface adopts high voltage isolation
technology.
3), Matching all kinds of lighting equipment.
4), Signal types: DMX512, and the RS-485 interface of various digital
signal transmission.
5), Signals connected socket: input RJ45.
6), Output 3 PIN screw terminals.
7), Input to output, output to output electrical isolation pressure:
> 1000V.
Specifictions:
Input Voltage: 12-24VDC | Channel: 1CH In & 1CH Out |
Input Signal: DMX512 | Output Signal: DMX512 |
Segregation Voltage: > 1000 V | Power Consumption: <1.5W |
Protection Grade: IP40 | Input/Output Socket: RJ45/Screw Terminal |
Gross Weight: 450g | Product Size: L160*W90*H30mm |
Product Size:
Tech-Parameters of DMX Signal Splitter Series:
Model No. | Input Signal | Channels | Input Voltage | Connect Socket | Special Function |
RE2000 | DMX512/1990 | 1CH in/2CH out | AC100-265V | RJ45/Press terminal | |
RE2501 | DMX512/1990 | 1CH in/1CH out | DC12-24V | RJ45/Press Terminal | |
RE2502 | DMX512/1990 | 1CH in/1CH out | DC12-24V | RJ45/Press Terminal | DMX Address Dispenser by Digital Tube |
RE2504H | DMX512/1990 | 1CH in/4CH out | AC90-250V | RJ45/Press Terminal | |
RE2508H | DMX512/1990 | 1CH in/8CH out | AC90-250V | RJ45/Press Terminal | |
RE2509H | DMX512/1990 | 8CH in/8CH out | AC90-250V | RJ45/Press Terminal |
Function Instructions:
(Left Side): The DMX signal input: RJ45 network interface, the
correct connection is on panel..
(Right Side): 2 PIN press button terminals for is DC power input.
The other 3 PIN press button terminals is for DMX output. " NC "
means no connection on the terminals.
Product Wiring Diagram:
DMX512 Control Signal Connection:
1. DMX signal cable is made of twisted pair (line), DMX signal
includes positive and negative end, in pressure welding DMX signal
line plug should pay special attention to polarity.DMX512
controller output signal positive, signal negative, signal ground
with DE8008 input interface corresponding connection.
2. DMX5000 output and DE8008's transmission lines can't be over 300
meters.
3. DMX5000 each interface can with not more than 170 DE8008. Eight
output interface. Through the JBLED FLASH light making software and
can with computer on line control. Realize infinite contact the DMX
lights.
4. When contacting 32 DE8008, DMX signal must add a signal amplifier
RE2502. Cascade can't more than 4 PCS.
Shanghai Jibang Electronic Technology Co., Ltd.
Shanghai Jibang Electronic Technology Co., Ltd. is a hi-tech
company which focuses on the R&D of LED control and dimming
systems. At present, our products of LED controllers and dimmers
occupy domestic markets.
Our core team has been engaged in the research and development of
LED control system since 2011. Our company was established in 2011
with the register capital of RMB10 million. Currently, we have 120
employees in total, including 20 engineers.
At present, our yearly production capability has been achieving 1
million units of controllers and dimmers. Our company owns 3 sets
of Tokyo Juki automatic placement machines, 1 set of full-automatic
printing machine, 1 set of semi-automatic printing machine, 8 sets
of hot-air reflow oven machines, 1 set of automatic shearing
machine, 1 set of automatic cutting-feet machine and several other
small equipment.
Our company owns DALI, 0-10V/1-10V, DMX, triac dimmer and
controller series which can match with high voltage and low voltage
LED lighting applications. All these products can meet various
dimming demands in different occasions which include commercial
lighting, hotel lighting, office lighting, home lighting, as well
as outdoor lighting.
The headquarters of our company is located in Shanghai. We also
have several agencies in Shenzhen, which can help our customers by
means of techniques and services without delay.
Wish we can fight together and share the glory in the coming
future!