
Anti Vibration Electronic Shunt Trip MCCB
Introduction
HKM1E series electronic plastic case circuit breaker (hereinafter
referred to as circuit breaker), suitable for AC 50Hz (60Hz), its
rated insulation voltage is 800V,
The circuit with rated working voltage of 400V and rated working
current up to 800A is used for infrequent conversion and infrequent
motor starting. Circuit breaker has overload
Long delay inverse time limit, short circuit short delay inverse
time limit, short circuit short delay time limit, short circuit
instantaneous and undervoltage protection functions and residual
current protection (optional), missing
Phase protection function (optional), which can protect the circuit
and power equipment from damage. The protection features of the
circuit breaker are complete and accurate, which can improve the
reliability of power supply and avoid
Necessary power outage, in which the'Z, B'type control has a
communication interface, can be "four remote" to meet the
requirements of the control center and automation system.
Circuit breakers are divided into M type (higher breaking type) and
H type (high breaking type) according to their rated limit
short-circuit breaking capacity. The circuit breaker has a small
size,
High breaking capacity, short arcing, anti-vibration and other
characteristics.
◎The circuit breaker can be installed vertically (that is,
installed vertically) or horizontally (that is, installed
horizontally).
◎The circuit breaker has isolation function, and its corresponding
symbol: "_x.
◎The circuit breaker cannot be reversed into the line, even if 1,
3, 5 are allowed to connect to the power line 2, 4, 6 to the load
line.
Feature
O The circuit breaker has the characteristics of small size, high
breaking, short arcing, anti-vibration and so on.
0 The circuit breaker can be installed vertically (that is,
installed vertically) or horizontally (that is, installed
horizontally).
O The circuit breaker cannot be reversed into the line, that is,
only 1, 3, 5 can be connected to the power line, and 2, 4, 6 can be
connected to the load line.
Normal working conditions and installation conditions
◎Altitude: ≤2000m.
◎Ambient temperature: -5C~ +409C.
◎Can withstand the influence of humid air.
◎Can withstand the influence of salt spray and oil spray.
◎The installation category of the main circuit of the circuit
breaker is I, and the installation category of the remaining
auxiliary circuits and control circuits is II.
◎When the maximum temperature is +409C, the relative humidity of
the air does not exceed 50%, and it can operate at a lower relative
humidity with a higher relative humidity,
Special measures should be taken for condensation that is
occasionally generated due to temperature changes.
◎The maximum inclination is 22.5%.
◎In a medium without explosion hazard, and the medium does not have
enough gas and conductive dust to corrode metal and destroy
insulation.
◎ In a place free from rain and snow.
WENZHOU QIUPU ELECTRIC POWER CO., LTD.
Wenzhou Qiupu Electric Power Co., Ltd. is located in Yueqing
Economic Development Zone, Zhejiang Province. It is a high-tech
enterprise specializing in the research and development, production
and sales of electric power products such as circuit breakers,
transformers, power distribution switches and high and low voltage
electrics. Our products are widely used in financial,
communications, municipal, transportation, power, construction,
aerospace, industrial control and other important areas, has won
the majority of users praise and signed a long-term cooperation
agreement.
As an innovative technology-based
enterprises, the company has strong technical force and the world's
leading production technology and high-end testing equipment, and
establish and improve the procurement of components, product
processing assembly, testing, packaging to sell a complete set
Quality management system to ensure that every product of the
eligibility, the company has 10 years of experience in the power
industry, and is still growing, product and sales network
throughout the country.