Pinch Rolls Pressing Arm Metal Steel Coil Uncoiler with Straightener Line

The feeder is an indispensable equipment for automatic continuous production with a punching machine. It can reduce the production cost of stamping processing, improve the processing efficiency and improve the quality of stamped products. Therefore, it has been widely used in the stamping industry.

The commonly used feeders for punching machines mainly include air feeders, roller feeders, NC servo feeders, clip feeders and gear feeders. The clip feeders and gear feeders are special feeders, one for For high-speed stamping of narrow sheet metal, one is a special feeder for processing of silicon steel sheet.

When the stamping owner purchases the feeder, it is necessary to clarify the characteristics of the stamping process, clarify the width, length, thickness and precision requirements of the stamping process, and comprehensively consider the later development. It is necessary to comprehensively consider the later use, maintenance, maintenance, repair, etc. For each cost, combine the above points to select the type of feeder, and then choose a strong manufacturer to purchase.

Feeder performance and advantages and disadvantages:
1. Air Feeder: This is the lowest-priced feeder equipment in the stamping industry. It uses cylinder clamps to complete the feeding action. It is easy to install and allows customers to automate with minimal investment.

Disadvantages: The feeding accuracy is not high. It is easy to damage the material by clamping the moving material. The failure rate is high (O-ring is easy to damage and the feeding is not accurate). It requires frequent maintenance and high maintenance and repair costs. It is mainly suitable for feeding accuracy. Processing occasions where the requirements are not high and the feeding speed is not fast.

2. roller feeder: no need to use additional power, gas source, the output shaft of the punching machine to provide feed power, feed speed and punch synchronization performance is good, is currently the most popular and cost-effective feeder equipment.

Disadvantages: The principle determines that the type of punching machine is limited (there must be an output shaft for punching), and the feeding length, width and thickness are limited (width is less than 700mm, thickness is less than 3.5mm, feeding length is less than 300mm), and the machine is used in steps. Adjustments are cumbersome and time consuming.

If the workpiece has excessive burrs or unusual noise during stamping, the mold may be passivated. The CNC feeder checks the punch and the lower die. When the edge is worn to produce an arc with a radius of about 0.10 mm, it is sharpened. Practice has shown that frequent micro-sharpening, rather than waiting for non-grinding, can not only maintain good workpiece quality, reduce punching force, but also prolong the life of the mold by more than one time.

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi

RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the original design standard, and into each manufacturing process. In 20 years has accumulated experience and excellent design ability of Japanese engineers guided ruihui highly responsible for Industry and ruihui strong executive team, created a batch of well-known auto parts manufacturers, allowing them to reach the high level in same industry，and investment less.

Customer case

Manufacturing industry; the United States Lear, Honda factory, Ford factory, GAC Group, Chongqing Changan, Wuhan Shenlong, BMW Brilliance, FAW Volkswagen, Beijing Hyundai.

And other household appliances manufacturers; such as GREE, Haier, Midea, Chigo Air conditioning.

hardware manufacturers; such as the United States Southco, are Zhongtai industrial manufacturers success cooperation case.

RUIHUI QUALITY is not the best in the world, and the price is not the cheapest. But we can provide excellent products to help you defeat your competitors.

Products: Feeder machine, Straightener machine, Uncoiler machine, Decoiler with Straightener, 3 in 1 NC Straightener Feeder, Coil handling system, Transfer system, Robot System, to meet the market needs of customers, improve work efficiency, reduce the burden of enterprise management personnel, maintenance of production safety and the customer staff made a significant contribution.

At present the company to further develop the market, at the end of 2017, the total investment reached 30 million USD, plant area of more than 20 thousand square meters, in order to meet the demand on the market and lay a solid foundation after.

Why choose us?

1^st,We have a high level of technical research and development team;

2^nd,We can provide the design and planning of the whole plant to realize the turnkey project;

3^rd, our philosophy: quality is the social responsibility;

4^th,our products have been recognized by the market, in the major automotive OEM, home appliance industry, hardware industry has been applied;

5^th,We have a highly effective after-sales service team and get customer approval.